VintageRex.com Collecting Paintball HistoryPaintball's Online Museum  
Navigation
Home Marker Exhibit Other Exhibits Exhibit Stats Search
All the SMG 68's had the serial # located on the left side above the trigger.

Back when the 68 Specials came out Tippmann would convert your SMG's into a 68 Special for $100. There were a lot of SMG's that were converted. When Tippmann did the conversion they did not remove the SMG tag with the Serial Number so even though the tag says SMG it is a 68 Special. 68 Specials had a hopper elbow cast into the breach.

The easiest way to tell a SMG 60 from a SMG 68 is that the feed tube is held on by a cap screw on the left side of the 60's. The 68's the feed tube is held on by the barrel. The barrel has to be lessened up to get the feed tube out of the 68's

For the stripper clips to feed they must have paint in them or if you want to see how the clips work with out paint, you must find some way to block the barrel. The way the indexing of the stripper clips work is it uses back pressure to index them.

| Site Disclaimer | Our Copyright Policy | Change Log | Site Admin | VintageRex.com is a Community Effort! |

All Content © 2003 - 2023 VintageRex.com, unless otherwise noted, All Rights Reserved.
This site is littered with Trademarks and copyrighted material that are property of thier respecitve owners.
When such material is used, the origins and copyright ownership is noted when possible. View our Copyright Policy.